Refrigeration Temperature Probes
Equivalent replacement refrigeration temperature probes for all major controls manufactures.
We manufacture and hold stock of equivalent replacement temperature probes for all major refrigeration control suppliers.
One Stop Probe Shop
We hold stock for same day dispatch of equivalent probes for Danfoss, CDK, ELM, RDM, JTL, Carel & Dixel.
Bespoke probe production
We can manufacture temperature probes to your own specification from as little as 10 probes to 10 thousand.
UK manufactured probes
Our probes are manufactured by us in the UK.
Confidence in our products
We have been manufacturing temperature probes for over 20 years. We know our probes work and have total confidence in the products we supply.
One Stop Probe Shop
Our standard refrigeration equivalent sensor is manufactured with a 6mm x 35mm 316 grade stainless steel bullet end, arctic quality PVC two core cable and finished to bare wire ends.
|Equivalent to||Part Number||Length|
|ELM (2K)||M22YEL04M0||4 Meter|
|ELM (2K) With Brad Harrison connector||M22YEL00M3BH||300mm|
|J.T.L, G. Barker & RMS (5K)||M22GRN04M0||4 Meter|
|5K With Brad Harrison connector||M22GRN00M3BH||300mm|
|TekTroniks /MICROM (2K25)||M22RED06MO||6 Meter|
|2K25 With Brad Harrison connector||M22RED00M3BH||300mm|
|PT1000 - RDM / Danfoss||M22BLU06MO||6 Meter|
|PT1000 With Brad Harrison connector||M22BLU00M3BH||300mm|
|ELM (3K)||M22WHT04M0||4 Meter|
|ELM (3K) With Brad Harrison connector||M22WHT00M3BH||300mm|
|CAREL (10K)||M22ORG03M0||3 Meter|
|CAREL (10K) With Brad Harrison connector||M22ORG00M3BH||300mm|
|Temperature Probe Fixing Kit||M05FX101|
Frequently asked questions
No, if you want to buy 1 or 1,000 we are happy to help.
We have a minimum order quantity on bespoke products only.
Please get in touch by phone or via email, we are more than happy to look at the production and give you a cost on any type of temperature probe. If, for some reason, we cannot make it we will let you know.
We supply a temperature probe fixing kit that contains all the items you need to ensure the bare wire ends from our replacement probe are correctly connected when joining to existing cables.
You don't have to use our connection kits but they offer a solution to ensure a good connection that will stand the test of time.